Wellington WEar Plate

Conversion Tables and Helpful Information

Download a Catalog pdf

Download a Line Card pdf

WELLBRAZE 400 / WELLBRAZE 500
Abrasion Resistant Wear Plates

Wear Plate Wellington 400 and 500 is a heat-treated, alloy steel, specifically developed to resist abrasion and shock. Its high hardness and shock resistance reduces wear.

Advantages:
Though Brinell hardness is an important factor in determining wear, MANGANESE and NICKEL give a better indication on the longevity of wear while in service.
Wellbraze 400 & 500 wear plates provide you with not only a high manganese content for wear but also a good content of nickel for the depth of hardness through out the plate.

Wellbraze 400 & 500 also has a 17-20% working hardening factor.
The longer Wellbraze is in service, the tougher it gets.

Working Instructions:

Welding:
Wellbraze 400 & 500 is easily welded by all low hydrogen production welding processes using E7018, E9018, 11018, and 12018 manual type electrodes..
Preheat is necessary only in extreme cold or highly restrained weldments.

Machining:
Wellbraze 400 & 500 can be drilled with ordinary high speed drills, Grinding can be accomplished easily. Because of its high hardness, planning and milling is limited to simple procedures.

Forming:
Suggested minimum bending radii:

Up to and including 3/8” thick the minimum inside radius is 2T
Above 3/8” thick through 1” thick the minimum inside radius is 4T

Size Range
Thickness; 1/8" to 6"
Widths; 48",72",96"
Lengths; 144", 240", 288"
Spec sizes are available.

Wellbraze 400 & 500 Wear Strips also available

APPLICATIONS
Wheelabrators
Chute Liners
Truck Beds
Dragline Buckets
Shovels
Scrapers
Screens
Conveyers
Grader Blades
Bang Boards
HIgh Lifts
Structural Uses
Tynes
I.D. Fans & Blades
Hoppers
Soil Discs
Tractor Shoes
Crusher Hammers
Logging Skids
Dipper Sticks
Refratory Uses
Baffle Plates
Fabricated Parts
Concrete Block Liners
Railroad Equipment
Dredges
Impellor Fan Blades
Exhaust Fan Blades
Scraper Blades
Pancake Dies
Blanking Dies